<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=345831125832216&amp;ev=PageView&amp;noscript=1">

ISO 17025 accredited

Torque Multiplier Calibration

 

 

Request A Quote

torque multiplier calibration iso 17025 accredited alliance calibration

Measurement Uncertainty:

Torque Tools

0.5.ozf.in to 1,000 lbf.in=0.33% of reading

10lbf.ft  to 125 lbf.ft= 0.6% of reading

 

60 lbf.ft to 600 lbf.ft=0.71% of reading

 

1,000 to 2,000 lbf.ft= 2.4% of reading

Standards followed:

ASME B107.300 - Torque Instruments

Manufacturers Specifications

 

Visit our Torque Calibration Page for more capabilities.

 

 

 

 

 

 

 

 

 

 

 

 

Frequently Asked Questions

Gage ID Number

Description and Size of Gage

Calibration Cycle

Check Points (if not specified, we adhere to our quality policy)

Gage ID is the unique identifier you use to identify the specific piece of equipment.

Calibration Cycle is the interval between calibrations.

 We use this information to provide a sticker for the calibrated instrument to show when it was calibrated and when you want it calibrated again.

 

 

 

 

YES!

Please include power cords, leads, and any accessories necessary for us to perform the calibration.

 

 

All ISO 17025 accredited calibrations are traceable through NIST or another NMI(National Metrology Institute) to the SI Unit. 

Calibration certificates include as-found data, as-left data, and measurement uncertainty.

Alliance Calibration

11402 Reading Road

Cincinnati, OH 45241

We do offer onsite calibration service within a 150-mile radius. Not all calibrations are best suited for onsite calibration.

Please contact Customer Service with your specific question.

The minimum order is $35.

No.

    Still, Have Questions?

        Request A Quote

        You Might Want To Read.......

        Reference Only or Calibrate?

        Is calibration required or should it be marked reference only? What is the difference between calibration not required and reference only?  

        August 4, 2020

        Don't clean your measurement & test equipment!

                The COVID-19 pandemic has brought cleaning to the forefront for many manufacturers. Specifically, sanitizing measurement & test equipment.

        April 23, 2020

        NIST Numbers: Your Auditor Is Wrong.

        I thought the topic of NIST numbers had been resolved when we published What you need to know about NIST numbers.

        January 1, 2020

        ISO 9001 or ISO 17025: How to choose a calibration company.

                ISO 17025 or ISO 9001: Which one is better? As a calibration company we are sometimes asked which is better ISO 9001 or ISO 17025 certification. That really is the wrong question.  Both of..

        December 27, 2019