<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=345831125832216&amp;ev=PageView&amp;noscript=1">

ISO 17025 accredited

Thread Wire Calibration

 

 

Request A Quote

Thread_Wire_Set_Calibration_Alliance_Calibration

Standards followed:

  • ISO 17025

  • Mil Std 45662A

  • ASME B1.2

  • ASME B89.1.17

  • Manufacturers Specifications

  • Customer Specifications

 

Frequently Asked Questions

Gage ID Number

Description and Size of Gage

Calibration Cycle

Check Points (if not specified, we adhere to our quality policy)

Gage ID is the unique identifier you use to identify the specific piece of equipment.

Calibration Cycle is the interval between calibrations.

 We use this information to provide a sticker for the calibrated instrument to show when it was calibrated and when you want it calibrated again.

 

 

 

 

YES!

Please include power cords, leads, and any accessories necessary for us to perform the calibration.

 

 

All ISO 17025 accredited calibrations are traceable through NIST or another NMI(National Metrology Institute) to the SI Unit. 

Calibration certificates include as-found data, as-left data, and measurement uncertainty.

Alliance Calibration

11402 Reading Road

Cincinnati, OH 45241

We do offer onsite calibration service within a 150-mile radius. Not all calibrations are best suited for onsite calibration.

Please contact Customer Service with your specific question.

The minimum order is $35.

No.

    Still, Have Questions?

        Request A Quote

        Thread Measuring Wires

        Thread measuring wires are the most universally recognized method of measuring pitch diameter on threaded gages, threaded parts and taps. The pitch diameter is the most important element of a thread that can be measured because it reflects the widest spectrum of possible defects in a threaded part or gage. The pitch diameter is the theoretical diametrical plane which passes through a thread at the point where the width of the thread tooth and groove are equal. The correct pitch diameter size assures that threaded product is within the required specifications for producing interchangeability, assembly and

        strength. Measuring the pitch diameter of thread gages is critical to controlling and qualifying threaded product.

        Thread Check Inc. offers a full range of thread measuring wires in inches, metric, Acme and special sizes traceable to NIST which meet or exceed ANSI/ASME B1.2 and ASME B89.1.17-2001.

        All wire sets are supplied within .000020" of the best wire size. All thread measuring wires are calibrated within .000005" of the size provided on the label. Commonality of the 3 wires is within .000010". Roundness is within .000010". Thread measuring wires are supplied with a minimum hardness of Rc. 62.5. Thread Check Inc. can supply wires and technical support for many modified and special threads including trapezoidal threads and buttress threads.

         

        Source: https://www.threadcheck.com/thread-measuring-wires/

         

        You Might Want To Read.......

        Don't clean your measurement & test equipment!

                The COVID-19 pandemic has brought cleaning to the forefront for many manufacturers. Specifically, sanitizing measurement & test equipment.

        April 23, 2020

        NIST Numbers: Your Auditor Is Wrong.

        I thought the topic of NIST numbers had been resolved when we published What you need to know about NIST numbers.

        January 1, 2020

        ISO 9001 or ISO 17025: How to choose a calibration company.

                ISO 17025 or ISO 9001: Which one is better? As a calibration company we are sometimes asked which is better ISO 9001 or ISO 17025 certification. That really is the wrong question.  Both of..

        December 27, 2019

        Out of Tolerance or Meets Specifications?

          When measurement and test equipment are sent out for calibration most customers of calibration want a statement of compliance.

        November 13, 2019